P87LPC764

General description

The P87LPC764 is a 20-pin single-chip microcontroller designed for low pin count applications demanding high-integration, low cost solutions over a wide range of performance requirements. A member of the Philips low pin count family, the P87LPC764 offers programmable oscillator configurations for high and low speed crystals or RC operation, wide operating voltage range, programmable port output configurations, selectable Schmitt trigger inputs, LED drive outputs, and a built-in watchdog timer. The P87LPC764 is based on an accelerated 80C51 processor architecture that executes instructions at twice the rate of standard 80C51 devices.

Features

• An accelerated 80C51 CPU provides instruction cycle times of 300?600 ns for all instructions except multiply and divide when executing at 20 MHz. Execution at up to 20 MHz when V_DD = 4.5 V to 6.0 V, 10 MHz when V_DD = 2.7 V to 6.0 V.
• 4.5 V to 5.5 V for P87LPC764HDH.
• 2.7 V to 6.0 V operating range for digital functions.
• 4 kbytes EPROM code memory.
• 128 byte RAM data memory.
• 32 byte customer code EPROM allows serialization of devices, storage of setup parameters, etc.
• Two 16-bit counter/timers. Each timer may be configured to toggle a port output upon timer overflow.
• Two analog comparators.
• Full duplex UART.
• I²C communication port.
• Eight keypad interrupt inputs, plus two additional external interrupt inputs.
• Four interrupt priority levels.
• Watchdog timer with separate on-chip oscillator, requiring no external components. The watchdog timeout time is selectable from 8 values.
• Active low reset. On-chip power-on reset allows operation with no external reset components.
• Low voltage reset. One of two preset low voltage levels may be selected to allow a graceful system shutdown when power fails. May optionally be configured as an interrupt.
• Oscillator Fail Detect. The watchdog timer has a separate fully on-chip oscillator, allowing it to perform an oscillator fail detect function.
• Configurable on-chip oscillator with frequency range and RC oscillator options (selected by user programmed EPROM bits). The RC oscillator option allows operation with no external oscillator components.
• Programmable port output configuration options: quasi-bidirectional, open drain, push-pull, input-only.
• Selectable Schmitt trigger port inputs.
• LED drive capability (20 mA) on all port pins.
• Controlled slew rate port outputs to reduce EMI. Outputs have approximately 10 ns minimum ramp times.
• 15 I/O pins minimum. Up to 18 I/O pins using on-chip oscillator and reset options.
• Only power and ground connections are required to operate the P87LPC764 when fully on-chip oscillator and reset options are selected.
• Serial EPROM programming allows simple in-circuit production coding. Two EPROM security bits prevent reading of sensitive application programs.
• Idle and Power Down reduced power modes. Improved wakeup from Power Down mode (a low interrupt input starts execution). Typical Power Down current is 1 uA.
• 20-pin DIP, SO, and TSSOP packages.

Products/packages

Products in the above table are all in production. Some variants are discontinued; click here for information on these variants.

Pricing/ordering/availability

Applications

Related applications
Digital media adapters
LCD display - discretes focus
PDA - discretes focus
HID
Projector
Intelligent washing machine
Transceiver board
Power amplifier board
Main CPU board
LCD TV - MMS functionality
Color mixing for RGBA LEDs

Design support

Application Notes

AN10115_1; Philips Microcontrollers in LIN Applications (15-Feb-02)

AN10116_2; Breakthrough In Small Signal - Low VCEsat (BISS) Transistors and their Applications (15-Feb-02)

AN10155_1; AN10155: Philips LPC9xx microcontroller in I2C applications (21-Jun-02)

AN10184_1; Connecting a keyboard to the Philips LPC9xx microcontroller LPC9xx microcontroller (14-Sep-02)

AN10187_1; Low-cost A/D-Conversion with Philips LPC microcontrollers Application Note (04-Oct-02)

AN10210_2; 87LPC76x as a remote control transmitter (16-May-03)

AN10289_1; LPC900 external crystal start-up (27-Apr-04)

AN10342_1; Using LPC900 code Flash as data storage (13-Dec-04)

AN466_2; P87LPC76x in-system programming (08-Jul-01)

Support Documents

75011099; 51LPC MCU In Lighting Applications (Leaflet) (2003-03-07)

75011361; 51LPC Microcontrollers & 3 Quadrant Triacs (2003-04-05)

75015326; 8A 1000V Hi-Com triacs (2005-09-01)

75014961; Applying Philips' power management portfolio 2005 (2005-06-01)

web; CodeArchitect Code Generation Tool for LPC900 / LPC700 (by ESAcademy) ()

index; Development Tools for LPC7xx devices (2003-05-21)

flash_as_datastorage_lpc900; Flash as Data storage LPC900.zip (17-Dec-04)

philips_i2c_logic_overview; Interface Products Business Line Specialty Logic Product Line I2C Logic Family Overview (2004-01-01)

75015755; LIN 2.0/SAE-J2602 standalone transceiver TJA1021 (2006-09-01)

li_ion_battery_charger; Li-ion Battery charger (17-Dec-04)

75011104; P87LPC762/764 Leaflet (2003-03-07)

ES_87LPC764_041702; P87LPC764 Erratasheet (2002-04-17)

75014621; Philips - The Innovation Leader in Microcontrollers (2005-03-01)

75014632; Philips - The Innovation Leader in Microcontrollers (2005-06-01)

75011339; Philips 51 LPC suited for LIN applications (Leaflet) (2003-04-05)

75016051; The choice for embedded technologies (2007-07-01)

75015572; The innovation leader in microcontrollers (2006-09-01)

Parametrics/similar products

Similar products
P87LPC764 links to the similar products page containing an overview of products that are similar in function or related to the type number(s) as listed on this page. The similar products page includes products from the same catalog tree(s), relevant selection guides and products from the same functional category.

Print / Email

• Print this information
• Email this information

Disclaimer

The information published on product information pages of the www.nxp.com or www.semiconductors.com websites is an extract from product data sheets and is for information purposes only. For detailed information please check the most recent version of the relevant product data sheet as published on these websites. In the event of any conflict between product information pages and data sheets or deviations from information provided in the product data sheets on these product information pages, the information provided in the product data sheets shall prevail.

The product status of the product(s) described in the product data sheet may have changed since publication of the data sheet and therefore information in datasheets on product status may be outdated. The latest information on product status is published on the product information pages of the above-mentioned websites.

As from October 1st, 2006 Philips Semiconductors has a new trade name - NXP Semiconductors, which will be used in future data sheets together with new contact details. In data sheets where the previous Philips references remain, please use the new links as shown below.

http://www.philips.semiconductors.com use http://www.nxp.com

http://www.semiconductors.philips.com use http://www.nxp.com (Internet)

sales.addresses@www.semiconductors.philips.com use salesaddresses@nxp.com (e-mail)

The copyright notice at the bottom of each page (or elsewhere in the document, depending on the version)
- © Koninklijke Philips Electronics N.V. (year). All rights reserved -
is replaced with:
- © NXP B.V. (year). All rights reserved.-

If you have any questions related to the data sheet, please contact our nearest sales office via e-mail or phone (details via salesaddresses@nxp.com). Thank you for your cooperation and understanding.